RDP to Raspberry Pi 3

RaspberryPi

Out of the box, if you install xrdp on the Raspbian image, you will get a connection failed message when you try to connect – to correct this follow these steps: sudo apt-get remove xrdp vnc4server tightvncserver then, sudo apt-get install tightvncserver sudo apt-get install xrdp You should now be able to rdp onto the …

Read moreRDP to Raspberry Pi 3

Server 2016 – unable to RDP to after reboot

I recently had an issue where after a reboot, I could no longer connect to my Server 2016 server through RDP. file shares etc appeared fine. To re-enable this remotely, I did the following steps from an elevated command prompt (Note, you will need pstools which can be downloaded here)   psexec \\remotemachine reg add …

Read moreServer 2016 – unable to RDP to after reboot